Boards and parts
for the markets
that cannot fail.
Each sector below is served by a dedicated engineering and quality team, with its own qualification standard, documentation pack and escalation path. No re-learning your industry on every order.
Boards that survive the road.
Battery management, inverters, ADAS sensors, body control and charging electronics — built on IATF 16949 lines with PPAP documentation and 12 oz heavy copper capability for high-current stages.
- — IATF 16949, PPAP level 3 documentation
- — IPC-6012DA automotive addendum
- — Thermal cycling and CAF qualification
- — 15-year part traceability retention
Where an escape is not an option.
Avionics, radar, satellite payloads and secure communications on AS9100D processes — with RF and mixed-dielectric expertise and complete material traceability from laminate lot to serial number.
- — AS9100D quality management
- — PTFE and mixed-dielectric RF to 40 GHz
- — ITAR-aware handling and export screening
- — First-article and coupon retention
Precision for diagnostics and care.
Imaging systems, patient monitoring, infusion and surgical platforms on an ISO 13485-certified quality system, with validated processes, biocompatible finishes and change control you can audit.
- — ISO 13485 certified processes
- — Cleanroom lamination and assembly zones
- — Biocompatible surface finishes
- — Validated process windows and revalidation
Low loss, high density, on schedule.
Massive MIMO radios, baseband units, optical transport and antenna feeders on low-loss laminates with press-fit interconnect and pressurised backplanes to 32 layers.
- — Dk/Df-controlled mixed dielectric
- — Backdrilled high-speed backplanes
- — ±8% impedance with TDR verification
- — Press-fit and compliant-pin capable
The substrate under the model.
Accelerator carrier boards, switch fabrics, power shelves and OAM/OCP form factors — high-layer-count, low-loss, thermally engineered and available in volume with reserved capacity.
- — High-layer, low-loss digital stack-ups
- — Heavy copper power delivery to 12 oz
- — OCP/OAM form-factor experience
- — Reserved capacity and VMI programmes
Twenty-year service life, measured.
Motor drives, metering, grid protection, solar inverters and building automation — metal-core and IMS technology for thermal headroom, with conformal coating and potting support.
- — Metal-core, IMS and heavy copper
- — High-CTI materials for mains isolation
- — Conformal coating and potting
- — 20-year documentation retention
One standard
per market,
pre-mapped.
Tell us the sector and we already know which certification, addendum and documentation pack applies. No discovery phase on your schedule.
Which sector
are you in?
We will route you to the engineering and quality team that already speaks your qualification language.