Documented.
Measured.
Audited.
Our quality system spans eight certifications, four in-house laboratories and a traceability record that follows every panel and every component lot from receipt to your dock.
Eight certifications, all current.
Quality management across fabrication, distribution and engineering services.
Automotive quality management with PPAP and APQP support.
Aerospace and defence quality management with configuration control.
Medical device quality management with validated processes.
Environmental management across effluent, waste and energy.
Occupational health and safety management for all plant operations.
UL recognised laminate and finished-board programmes for North America.
Counterfeit mitigation for distribution and ANSI/ESD S20.20 handling.
Four labs. No waiting on outside test.
Reliability, analytical, metrology and component-authentication testing on the same campus as the lines.
Analytical laboratory
Microsection, SEM/EDS, ionic cleanliness, solderability, XRF plating thickness and wet-bench chemical analysis.
Reliability laboratory
Thermal cycling, IST, HAST, CAF, thermal shock and vibration testing with in-house failure analysis.
Metrology & electrical
TDR and impedance verification, coupon testing, calibrated dimensional metrology and 40,000-net flying probe.
Component authentication
AS6081-aligned X-ray, XRF, decapsulation, X-ray fluorescence, curve tracing and visual inspection for non-franchised lots.
From laminate
lot to
serial number.
Every panel carries a machine-readable identity from the moment material is issued. Process parameters, operator, equipment, inspection images and test results attach to it automatically.
Declarations you can file straight away.
| Regime | Scope | Evidence provided |
|---|---|---|
| RoHS 3 | All finished boards and components | Declaration of conformity per shipment |
| REACH SVHC | All supplied articles | SVHC screening to current candidate list |
| Conflict minerals | Tin, tantalum, tungsten, gold | CMRT and smelter disclosure |
| PFAS / halogen-free | Laminate and finish selection | Material datasheets and test reports |
| PPAP / APQP | Automotive programmes | Level 3 packs with MSA and capability studies |
Seven gates before a board ships.
Incoming material
Laminate, chemistry and component lot verification against certificates.
Inner-layer AOI
100% optical inspection with model-assisted defect classification.
Drill & plating
Coupon checks, hole-wall integrity and copper thickness verification.
Outer-layer & finish
Solder mask registration, surface-finish thickness and adhesion checks.
Electrical test
Flying probe continuity, isolation and impedance coupon validation.
Final visual & dimensional
IPC-A-600 Class 3 criteria with documented accept/reject review.
Packing & release
Moisture-barrier packing, bake control and COC issue.
Questions auditors ask us.
If yours is not here, our quality team will answer it in writing.
Request the
audit pack.
Certificates, declarations, capability studies and sample trace records — sent as one PDF.